Cautions and Codes Related to Shafts (part 3)

The 2015 IBC code section …don’t worry, it will be painless and its SUPER useful information. Stick with me please!

Section 713 is on shaft enclosures and there are a few things you really need to know. I’m going to generalize and just tell you to go online for the specifics when you really need them (or hire me and I can give them to you).

Generally a shaft has 4 sides, a top and a bottom. Your shaft may have 3 sides or it may have 10 sides, but for simplicity we will assume it is like most shafts and has 4 sides. It MUST have a top and a bottom because remember your floors are required to have a 2 hour rating (in most concrete buildings) and the shaft has to match the floor’s rating so that you can have an unprotected hole in the floor that could potentially run the height of the building.

It has to have a bottom, which could be the ground floor, or it could be a horizontal rated assembly made of concrete, gypsum or in some cases firestop materials.

It also has to have a top. That can be the roof or again it could be one of the rated assemblies we talked about. If you have a penetration through the top or bottom of the shaft you will have to firestop those penetrations.

Guess what! If you use a horizontal gypsum assembly then there are no UL listed details for penetrations through a horizontal shaft wall assembly. You automatically have to get an EJ. Is that included in your firestop submittals? It should be!

Now the top or bottom of your shaft could be part of a room, for example if you have a trash chute or linen chute then the bottom of the shaft can be the laundry or trash room provided the surrounding walls are rated and you have no prohibited penetrations.

More on prohibited penetrations in our next post! If you have shafts on your project or are concerned that your firestop submittals might be missing something, as always contact us here.